DODGE FC-IP-115LE Flange Block Bearings

Cap bolt recommended tightening torque:149.1 N·m; P180°:17.8 kN; J max.:241.3 mm; End plug (suffix Y):EPR 5; RG:1/4 NPT; Bearing:22311 EK; Housing:SAF 611; H2:30.163 mm; P90°:25.8 kN; Mass pillow block:13.7 kg;

D:300 mm; Mass bearing:20 kg; Fatigue load limit Pu:88 kN; r1,2 min.:4 mm; Reference speed:2400 r/min; Basic dynamic load rating C:780 kN; d1 ≈:195 mm; Basic static load rating C0:830 kN; db min.:199 mm; Limiting speed:2800 r/min;

Tolerance housing:H7; D:105 mm; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ min.:0.05; B:100 mm; d:80 mm; Mass bushing:2.24 kg; Permissible sliding velocity v min.:0.25 m/s; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1;

d:85 mm; D:110 mm; static Cor:150.000 kN; rs (min):1 mm; Pu:6.820 kN; Oil:3 500 min-1; dynamic Cr:51.520 kN; Grease:2 700 min-1; D1:87 mm; H:19 mm;

Specific static load factor K0:45 N/mm²; D:45 mm; a:3 mm; Tolerance housing:H7; h:36 mm; α:124 °; d:35 mm; Permissible sliding velocity v max.:0.5 m/s; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ max.:0.15;

N1:35 mm; Q180°:900 kN; J1:130 mm; Appropriate attachment bolt, rec. tightening torque:1310 N·m; P0°:2600 kN; Adapter sleeve:H 2338; N4 max.:20 mm; End cover:ETS 40; L:610 mm; H:411 mm;

m0:1.145; Prod_Type3:ACBB_SR_MM_DB; SBRG:3; C_conv:239000; DA_:28.575; yobi:7316AWDB; B_:39; DI_:96.256; D_:170; SRIN:0;

Ew:10 mm; Basic static load rating C0:3.15 kN; Limiting speed:38000 r/min; Reference speed:34000 r/min; U:13 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 6x10x2 S; Basic dynamic load rating C:3.69 kN; Fatigue load limit Pu:0.36 kN; Mass needle roller and

ra max.:2 mm; db min.:85 mm; Permissible angular misalignment α:2.5 °; Calculation factor Y2:4.5; da max.:99 mm; Calculation factor e:0.22; r1,2 min.:2 mm; B:33 mm; Mass bearing + adapter sleeve:2.85 kg; Fatigue load limit Pu:1.25 kN;

Housing:SYWK 504 Y; A:32 mm; Basic static load rating C0:6.55 kN; J max.:101 mm; A5:26.3 mm; Mass bearing unit:0.27 kg; N:17.5 mm; H2:16 mm; End cover:ECW 204; A1:21 mm;

Material constant KM:330; Specific dynamic load factor K:100 N/mm²; B:52.578 mm; Lubricant:Regular relubricatio; Da max.:85.3 mm; rb max.:1 mm; M:4 mm; Specific static load factor K0:300 N/mm²; Basic static load rating C0:850 kN; r1 min.:1.5 mm;

B5:125 mm; G3:13 mm; B:100 mm; d1:900 mm; Mass adapter sleeve assembly:409 kg; B1:420 mm; A:10 mm; Lock nut:HME 30/950; d:950 mm; Hydraulic nut:HMV 190E;

D:920 mm; Mass bearing:139 kg; Da max.:902 mm; D1 ≈:867 mm; Fatigue load limit Pu:520 kN; s max.:8 mm; Calculation factor e:0.3; d1 ≈:810 mm; E:878 mm; Calculation factor Y:0.4;

hidTable:ecat_NSESBM; SREN:0; hidYobi:691X; B_:2; SRIN:0; Cr:24; SDM_:3.25; LangID:1; Prod_Type3:ESM_MD_OT; D_a:3.8;

Basic dynamic load rating C:643 kN; Da max.:264.5 mm; r3,4 min.:3.3 mm; r1,2 min.:3.3 mm; Cb min.:11 mm; D:279.4 mm; B:57.15 mm; rb max.:3.3 mm; ra max.:3.3 mm; Ca min.:9 mm;