IPTCI UCF 204 12 Flange Block Bearings

B:0.5625 in; dynamic load capacity:1749 lb; D:2.0000 in; closure type:Double Sealed; cage material:Nylon; snap ring included:Without Snap Ring; manufacturer catalog:Click here; bore type:Round; row type & fill slot:Single Row Non-Fill; maximum rpm:2500 rpm;

d:2.4375 in; lock nut number:KM15; lock washer number:MB15; lock nut outside diameter:98 mm; includes:Lock Washer (MB; thread size:M75x2; series:H2; overall length:43 mm; taper:1:12;

Seals or Shields:Open Type; Cage Type:Steel; Static Load Rating (kN):262; Availability:In Stock; Weight:1.41 KGS; D:115mm; d:75mm; Dynamic Load Rating (kN):200; B:40mm; SKU:24015ejw33s3c4-timke;

overall height:4-1/64 in; d:1.4375 in; locking device:Set Screw; slot spacing:2.4375 in; lubrication type:Lubrication Fitting; overall length:4-59/64 in; unit type:Side Mount; housing material:PBT Thermoplastic; seal type:Contact with Slinger; manufacturer product page:Click here;

TypeValvesPlace of OriginJiangsu, ChinaMaterialCase IronProduct namehigh pressure casting vale hydraulic exhaust control valve made in chiApplicationAgricultureStructureSectionalThreadBSPP, UNFModelSVV06Voltage12V 24VWarranty12MonthsStandard or NonstandardStandardFlow Rate/LPM50LPM,

lubrication hole type:Lubrication Groove &; cage type:Roller Guided; finish/coating:Uncoated; bore type:Tapered 1:12; cage material:Brass; application:Vibratory Applicatio; fillet radius:2.1 mm; static load capacity:1800000 N; dynamic load capacity:1270000 N; operating temperature range:-30 of

Clearance:Standard; Availability:In Stock; Seals or Shields:Open Type; d:65mm; Dynamic Load Rating (kN):83; B:23mm; SKU:32013xa-ntn; Weight:0.02 KGS; Grease Limiting Speed (r/min):3400; Oil Limiting Speed (r/min):4600;

Seals or Shields:Open Type; Oil Limiting Speed (r/min):13100; d:90mm; SKU:7018a5trdulp3-nsk; D:140mm; Availability:In Stock; Grease Limiting Speed (r/min):8700; Preload:Light; B:24mm; Dynamic Load Rating (kN):68;

set screw thread size:5/16-24 UNF; D:1.7520 in; bearing bore diameter:1.0625 in; manufacturer product page:Click here; B:0.6260 in; material:Steel;

maximum v value:1200 (sfm); D:13/16 in; manufacturer catalog:Click here; overall length:1-1/2 in; material specification:Oilite®, Synthet; d:5/8 in; bearing material:Oil-Impregnated Bron; operating temperature range:-35 °F to +; standards met:SAE 841, CT-1000-K2

bore type:Straight; operating temperature range:Maximum of +120; static load capacity:530000 N; outer ring type:Not Split; fillet radius:2 mm; cage material:Polyamide; bearing material:Steel; B:45 mm; internal clearance:C0; closure type:Open;

Seals or Shields:Open Type; Speed Rating (r/min):11000; Static Load Rating (kN):51.6; Weight:0.64 KGS; B:20mm; SKU:2mm9115wicrsum-timke; Availability:In Stock; Cage Type:Plastic; Dynamic Load Rating (kN):43.5; Clearance:Standard;

D:52 mm; closure type:Open; B:0.8750 in; snap ring included:Without Snap Ring; d:20 mm; row type & fill slot:Double-Row Non-Fill;

housing material:Cast Iron; duty type:Standard Duty; lubrication type:Lubrication Fitting; replacement bearing:MH-20RT; operating temperature range:-20 to +200 &de; expansion type:Non-Expansion Bearin; radial dynamic load capacity:4381 lb; length through bore:2-15/32 in; series:FBMH-T; D:1

series:KB; ball width:0.8750 in; manufacturer catalog:www.aurorabearing.co; thread type:UNF-3A-LH; shank thread size:3/4-16; housing material:Low Carbon Steel; misalignment angle:14 º; head diameter:1.7500 in; shank thread length:1.7500 in; harmonization code:8483.30.8055;